01V96i

在经典机型01V96VCM的功能基础上,01V96i新增了通过USB2.0传输方式的多轨录音功能,同时进一步提升了音质。能够胜任包括工程安装、音频制作以及现场扩声工作的新一代全能型数字调音台。
 

01V96i

联系我们

产品描述  

在现场演出环境中,实时多轨录音的需求日益增加,01V96i正是为了满足此类需求应运而生。01V96i采用了USB2.0连接方式—它可以有效地帮助您将自己的录音棚随带于身。 仅通过一根USB数据线完成16 in/16 out 96kHz 的实时高品质音频数据在调音台与PC端DAW数字音频工作站的无缝传输,专业〜录音作品的录制和编辑将变得的简便。同时,USB2.0连接还负责两路MIDI控制数据的通讯,这样您便可以通过附赠的Cubase AI软件将您在调音台上精确的物理控制内容和软件端控制完美同步连接起来。

参数  

01V96i
Mixing capability Mixing channels 32 Mono + 4 Stereo
GROUP 8
AUX 8
MAIN Stereo
Input channel functions Gate, Attenuator, 4-band PEQ, 2x Compressor, Delay, Pan
Output channel functions Attenuator, 4-band PEQ, Compressor, Delay
On-board processors 4x SPX multi effectors
I/O Mic inputs 12
Phantom power +48V DC; ON/OFF per 4ch
Line inputs 2x Stereo, 2x 2tr in
AD converter 24-bit; 128-time over sampling
Line outputs Stereo output, Monitor output, 4x Omni output
DA converter 24-bit; 128-time over sampling
Digital I/O ADAT (8-in/8-out), 2tr in/out
Expansion slots Mini-YGDAI (16-in/16-out)
Control and others To Host(USB), MIDI, Word clock I/O
Internal processing 32bit, Accumulator: 58bit
Sampling frequency rate Internal 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
External 44.1kHz/88.2kHz (-10%) - 48kHz/96kHz (+6%)
Signal delay Less than 1.6ms CH INPUT to STEREO OUT (@SampIing frequency = 48kHz) / Less than 0.8ms CH INPUT to STEREO OUT (@SampIing frequency = 96kHz)
Total harmonic distortion CH INPUT to STEREO OUT: Less than 0.05%, 20Hz to 20kHz @+14dBu into 600Ω / Less than 0.01%, 1kHz @+24dBu into 600Ω (@SampIing frequency = 48kHz) / Less than 0.05%, 20Hz to 40kHz @+14dBu into 600Ω / Less than 0.01%, 1kHz @+24dBu into 600Ω (@SampIing frequency = 96kHz)
Frequency response CH INPUT to STEREO OUT: 0.5, -1.5dB, 20Hz - 20kHz @+4dBu into 600Ω(@SampIing frequency = 48kHz) / 0.5, -1.5dB, 20Hz - 40kHz @+4dBu into 600Ω(@SampIing frequency = 96kHz)
Dynamic range 110dB typ. DA Converter (STEREO OUT) / 105dB typ. AD+DA (to STEREO OUT) @fs=48kHz / 105dB typ. AD+DA (to STEREO OUT) @fs=96kHz
Hum & noise level Equivalent input noise -128dBu Equivalent Input Noise.
Residual output noise -86dBu residual output noise. STEREO OUT: STEREO OUT off. / -86dBu (90dB S/N) STEREO OUT: STEREO fader at nominal level and all CH INPUT faders at minimum level. / -64dBu (68dB S/N) STEREO OUT: STEREO fader at nominal level and one CH INPUT fader at nominal level
Crosstalk -80dB adjacent input channels (CH1-12) / -80dB adjacent input channels (CH13-16) / -80dB input to output
Power requirements AC100V, 120V, 220-240V 50/60 Hz
Power consumption 90W
Dimensions W 436mm; 17-1/8in
H 148mm; 5-7/8in
D 548mm; 21-5/8in
Net weight 14kg; 30.86lbs
Others Fader: 100mm motorized x17

Analog Input Characteristics

Input Terminal PAD GAIN Actual Load Impedance For Use With Nominal Input Level Connector
Sensitivity Nominal Max. before clip
CH INPUT
1 to 12
0 -60dB 3kohms 50-600ohm Mics & 600ohm Lines -70dBu -60dBu -40dBu A:XLR-3-31 type (Balanced)
B:TRS phone jack (Balanced)
-16dB -26dBu -16dBu +4dBu
20 -6dBu +4dBu +24dBu
CH INPUT
13 to 16
-26dB 10kohms 600ohm Lines -36dBu -26dBu -6dBu TRS phone jack (Balanced)
+4dB -6dBu +4dBu +24dBu
CH INSERT IN 1 to 12 10kohms 600ohm Lines -12dBu -2dBu +18dBu TRS phone jack (Unbalanced)
2TR IN [L,R] 10kohms 600ohm Lines -10dBV -10dBV +10dBV RCA pin jack (Unbalanced)

Analog Output Characteristics

Output Terminal Actual Source Impedance For Use With Nominal Output Level Connector
Nominal Max. before clip
STEREO OUT L,R 75ohms 600ohm Lines +4dBu +24dBu XLR-3-32 type (Balanced)
OMNI OUT 1 to 4 150ohms 10kohm Lines +4dBu +24dBu TRS phone jack (Balanced)
MONITOR OUT L,R 150ohms 10kohm Lines +4dBu +24dBu TRS phone jack (Balanced)
CH INSERT OUT 1 to 12 600ohms 10kohm Lines -2dBu +18dBu TRS phone jack (Unbalanced)
2TR OUT [L,R] 600ohms 10kohm Lines -10dBV +10dBV RCA pin jack (Unbalanced)
PHONES 100ohms 8ohm Lines 4mW 25mW ST phone jack (Unbalanced)
40ohm Lines 12mW 75mW

Digital Input Characteristics

Terminal Format Data Length Level Connector
2TR IN DIGITAL IEC-60958 24bit 0.5Vpp/75ohms RCA pin jack
ADAT IN ADAT 24bit - OPTICAL

Digital Output Characteristics

Terminal Format Data Length Level Connector
2TR OUT DIGITAL IEC-60958
Consumer use
24bit 0.5Vpp/75ohms RCA pin jack
ADAT OUT ADAT 24bit - OPTICAL

Digital Input/Output Characteristics

Terminal Format Data Length Level Connector
USB USB2.0 24bit - B type USB connector

Control I/O Characteristics

Terminal Format Level Connector
TO HOST USB USB 0V - 3.3V B type USB connector
MIDI IN MIDI - DIN Connector 5P
OUT MIDI - DIN Connector 5P
THRU MIDI - DIN Connector 5P
WORD CLOCK IN - TTL/75ohms BNC Connector
OUT - TTL/75ohms BNC Connector

附件下载  

产品推荐  

  • RK1

     Copyright © 2019 广州畅哲音响设备有限公司 版权所有           粤ICP备19099223号        技术支持:ForYing.Com